Development of MAP Module in Simulink Model of Engine Control System

JIA Li; ZHANG Weibiao; YANG Wei; ZHI Haifeng; LIU Tao; KUANG Fuhong; XIAO Wei

doi:10.3969/j.issn.1001-2222.2017.06.012

Vehicle Engine >

2017 , Vol. 0 >Issue 6: 62 - 64

DOI: https://doi.org/10.3969/j.issn.1001-2222.2017.06.012

Development of MAP Module in Simulink Model of Engine Control System

JIA Li ,
ZHANG Weibiao ,
YANG Wei ,
ZHI Haifeng ,
LIU Tao ,
KUANG Fuhong ,
XIAO Wei

Expand

(China North Engine Research Institute(Tianjin),Tianjin 300400,China)

Fold

Abstract

The codes of Simulink model for engine control system could not support the calibration and programming of MAP and MAP module based on Sfunction was hence developed. Then the corresponding engine model was built and the control codes applied to Freescale MPC5634M was generated. The test results show that the MAP module supports the online calibration and offline programming．

Key words： control unit; code generation; online calibration

Cite this article

JIA Li , ZHANG Weibiao , YANG Wei , ZHI Haifeng , LIU Tao , KUANG Fuhong , XIAO Wei . Development of MAP Module in Simulink Model of Engine Control System[J]. Vehicle Engine, 2017 , 0(6) : 62 -64 . DOI: 10.3969/j.issn.1001-2222.2017.06.012

Options

Abstract

Outlines

模态框（Modal）标题

Abstract

Cite this article