Design and Test of Gasoline Online Knock Detection System

ZHANG Zhimou,ZHENG Shengbin,TAO Wenhui,YANG Tao,CHEN Jingrui,SHI Lei

Vehicle Engine ›› 2018, Vol. 0 ›› Issue (4) : 6-10.

Vehicle Engine ›› 2018, Vol. 0 ›› Issue (4) : 6-10. DOI: 10.3969/j.issn.1001-2222.2018.04.002

Design and Test of Gasoline Online Knock Detection System

  • ZHANG Zhimou1,ZHENG Shengbin2,TAO Wenhui2,YANG Tao2,CHEN Jingrui1,SHI Lei1
Author information +
History +

Abstract

Under the control of the embedded industrial computer, NI data acquisition card and LabVIEW software were used to realize the acquisition and processing of output signals of nonresonant piezoelectric knock sensor and photoelectric tachometric transducer, and hence the online detection of gasoline knock based on the body vibration detection was realized. The software design of detection system was completed and the knock detection based on LabVIEW was realized through the signal acquisition module, processing module, knock determination module and data storage module. The knock test of a 3cylinder gasoline engine was conducted. By analyzing the vibration signal, the characteristic frequency range and knock threshold were determined and the influencing factors of threshold were further studied. Finally, the online detection of engine knock was conducted. The test results show that the detection system can identify engine knock effectively.

Key words

gasoline engine / knock / online detection

Cite this article

Download Citations
ZHANG Zhimou,ZHENG Shengbin,TAO Wenhui,YANG Tao,CHEN Jingrui,SHI Lei. Design and Test of Gasoline Online Knock Detection System[J]. Vehicle Engine. 2018, 0(4): 6-10 https://doi.org/10.3969/j.issn.1001-2222.2018.04.002

Accesses

Citation

Detail

Sections
Recommended

/