柴油机传动轴承磨损故障分析

高丽英; 张树勇; 王延荣; 朱美琳; 刘玉婷; 孙亚奇

doi:10.3969/j.issn.1001-2222.2022.03.013

车用发动机 >

2022 , Vol. 0 >Issue 3: 88 - 92

DOI: https://doi.org/10.3969/j.issn.1001-2222.2022.03.013

栏目

柴油机传动轴承磨损故障分析

高丽英 ,
张树勇 ,
王延荣 ,
朱美琳 ,
刘玉婷 ,
孙亚奇

展开

（中国北方发动机研究所（天津），天津 300400）

收起

Wear Failure Analysis of Diesel Engine Drive Bearing

GAO Liying ,
ZHANG Shuyong ,
WANG Yanrong ,
ZHU Meilin ,
LIU Yuting ,
SUN Yaqi

Expand

(China North Engine Research Institute(Tianjin),Tianjin 300400,China)

Fold

摘要

针对柴油机传动机构凸轮轴齿轮滑动轴承和惰轮轴承两种典型的滑动轴承磨损问题，通过仿真和试验的方法进行故障原因分析。分析表明：凸轮轴齿轮滑动轴承位于供油末端，在柴油机起动瞬时处于边界摩擦甚至干摩擦状态，是导致异常磨损的主要原因；惰轮轴承处故障原因为润滑结构布置不当导致润滑不良进而磨损。针对不同的故障原因提出改进方案，通过对比分析有效解决了上述问题，为传动机构滑动轴承的设计及故障分析提供参考。

关键词： 柴油机; 传动轴承; 滑动轴承; 磨损; 故障分析

本文引用格式

高丽英 , 张树勇 , 王延荣 , 朱美琳 , 刘玉婷 , 孙亚奇 . 柴油机传动轴承磨损故障分析[J]. 车用发动机, 2022 , 0(3) : 88 -92 . DOI: 10.3969/j.issn.1001-2222.2022.03.013

Abstract

Aiming at the wear problems of camshaft and idler gear sliding bearing in diesel engine driving mechanism, the fault reason was analyzed by simulation and test methods. The analysis shows that the camshaft gear sliding bearing is located at the end of oil supply and in the state of boundary friction or even dry friction at the moment of diesel engine start-up, which is the main cause of abnormal wear. The failure reason of idler gear bearing is that the improper lubrication structure leads to poor lubrication and wear. The improvement is then proposed, and the abovementioned problems are hence effectively solved according to the comparative analysis, which can provide the reference for the design and fault analysis of driving mechanism sliding bearing.

Key words： diesel engine; drive bearing; sliding bearing; wear; fault analysis

Options

摘要页面

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract