Mo元素对热喷涂铁基涂层组织和摩擦性能的影响

张海瑜; 王芙蓉; 王志东; 杜双明; 刘二勇

doi:10.3969/j.issn.1001-2222.2021.04.009

车用发动机 >

2021 , Vol. 0 >Issue 4: 57

DOI: https://doi.org/10.3969/j.issn.1001-2222.2021.04.009

栏目

Mo元素对热喷涂铁基涂层组织和摩擦性能的影响

张海瑜 ,
王芙蓉 ,
王志东 ,
杜双明 ,
刘二勇

展开

（1.西安科技大学，陕西西安 710054；2.西安重装铜川煤矿机械有限公司，陕西铜川 727000；3.中国石油长庆油田分公司物资供应处（物资管理部），陕西西安 710016）

收起

Effects of Mo Element on Microstructure and Friction Properties of Thermal Spraying Iron-Based Coating

ZHANG Haiyu ,
WANG Furong ,
WANG Zhidong ,
DU Shuangming ,
LIU Eryong

Expand

(1.Xi^，an University of Science and Technology,Xi^，an 710054,China;2.Xi^，an Reshipment Tongchuan Coal Mine Machinery Co.,Ltd.,Tongchuan 727000,China;3.Material Supply Department of PetroChina Changqing Oilfield Company,Xi^，an 710016,China)

Fold

摘要

为解决铝合金发动机缸体耐磨性差的问题，采用等离子喷涂技术在铝合金表面制备了不同Mo含量的铁基涂层（XPT-512-Mo），研究了Mo元素对涂层组织结构及摩擦磨损性能的影响。结果表明：XPT-512-Mo铁基涂层主要由铁素体(F)和Mo相组成，其截面形貌呈现典型的热喷涂层状结构。摩擦磨损性能表明：在干摩擦/油润滑工况下，随着金属Mo的加入，XPT-512-Mo系涂层的磨损率均有所降低，尤其以低Mo含量的XPT-512-30Mo涂层的摩擦磨损性能最为优异，其原因在于涂层磨损表面形成了MoO₃和Fe₃O₄的复合氧化物膜层，促进了氧化物的协同润滑作用，发挥了显著的润滑及减摩作用。

关键词： 等离子喷涂; 铁基涂层; 摩擦; 磨损; 协同润滑

本文引用格式

张海瑜 , 王芙蓉 , 王志东 , 杜双明 , 刘二勇 . Mo元素对热喷涂铁基涂层组织和摩擦性能的影响[J]. 车用发动机, 2021 , 0(4) : 57 . DOI: 10.3969/j.issn.1001-2222.2021.04.009

Abstract

In order to solve the problem of poor wear resistance of aluminum alloy engine body, iron-based coating (XPT-512-Mo) with different Mo content was prepared on the surface of aluminum alloy by plasma spraying technology. The effects of Mo element on the microstructure and tribological properties of coating were studied. The results show that XPT-512-Mo iron-based coating is mainly composed of ferrite (F) and Mo phase and its cross-section morphology presents a typical thermal spraying coating structure. The tribological properties indicate that the wear rate of XPT-512-Mo coating decreases with the addition of metal Mo under dry friction or oil lubrication condition. The coating with low Mo content like XPT-512-30Mo hence has the optimal wear performance. The composite oxide film of MoO₃ and Fe₃O₄ has formed on the worn surface of coating, which acts as the role of collaborative lubrication and plays a significant role in lubrication and antifriction.

Key words： plasma spraying; iron-based coating; friction; wear; collaborative lubrication

Options

摘要页面

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract