麻疯树油甲酯喷雾特性试验

姜熠豪,姜根柱,张衍

车用发动机 ›› 2023, Vol. 0 ›› Issue (4) : 58-63.

车用发动机 ›› 2023, Vol. 0 ›› Issue (4) : 58-63. DOI: 10.3969/j.issn.1001-2222.2023.04.010
栏目

麻疯树油甲酯喷雾特性试验

  • 姜熠豪,姜根柱,张衍
作者信息 +

Atomization Characteristics of Jatropha Oil Methyl Ester  

  • JIANG Yihao,JIANG Genzhu,ZHANG Yan
Author information +
文章历史 +

摘要

基于高压可视化定容燃烧弹试验台,利用高速相机和光学系统在高压环境条件下对麻疯树油甲酯(JME)燃料的雾化特性进行研究,分析了不同试验条件下气相喷雾贯穿距和喷雾锥角的影响规律。结果表明:随着喷射时间的增加,JME燃料的喷雾贯穿距离呈现先增大后趋于稳定的趋势,且环境密度对其影响最大;喷雾锥角最大值出现在环境温度为823 K,环境密度为21 kg/m3,氧质量分数为15%的条件下。

Abstract

Based on the high-pressure visual constant volume combution bomb test rig, the atomization characteristics of jatropha oil methyl ester(JME) fuel under highpressure environmental conditions were studied by using a high-speed camera and an optical system. The influencing laws of gas-phase spray penetration distance and spray cone angle were analyzed under different test conditions. The results show that the spray penetration distance of JME fuel first increases and then tends to be stable and the environmental density is the greatest influencing factor when conducting the injection constantly. According to the results, the spray cone angle reaches the maximum under the condition with the temperature of 823 K, the density of 21 kg/m3 and the oxygen concentration of 15%.

关键词

/ mso-hansi-font-family: 宋体">麻疯树油甲酯;生物柴油;雾化特性;喷雾贯穿距;喷雾锥角   

Key words

jatropha oil methyl ester / biodiesel / atomization characteristic / spray penetration distance / spray cone angle

引用本文

导出引用
姜熠豪,姜根柱,张衍. 麻疯树油甲酯喷雾特性试验[J]. 车用发动机. 2023, 0(4): 58-63 https://doi.org/10.3969/j.issn.1001-2222.2023.04.010
JIANG Yihao,JIANG Genzhu,ZHANG Yan. Atomization Characteristics of Jatropha Oil Methyl Ester  [J]. Vehicle Engine. 2023, 0(4): 58-63 https://doi.org/10.3969/j.issn.1001-2222.2023.04.010

Accesses

Citation

Detail

段落导航
相关文章

/