电控单体泵供油过程联合仿真研究

赵万林; 李国岫; 王兰; 李治洪; 王杰; 何双毅

doi:10.3969/j.issn.1001-2222.2018.04.014

车用发动机 ›› 2018, Vol. 0 ›› Issue (4) : 73-78. DOI: 10.3969/j.issn.1001-2222.2018.04.014

栏目

电控单体泵供油过程联合仿真研究

赵万林¹，李国岫¹，王兰¹，李治洪¹，王杰²，何双毅²

作者信息 +

Co-Simulation for Fuel Supply Process of Unit Pump

ZHAO Wanlin¹，LI Guoxiu¹，WANG Lan¹，LI Zhihong¹，WANG Jie²，HE Shuangyi²

Author information +

文章历史 +

摘要

在Ansys Workbench平台上使用电磁-机-液三维联合仿真的方法，开展了单体泵燃油系统压缩供油过程仿真研究，分析了电磁系统、机械系统以及液力系统之间的关系。使用Maxwell和Fluent模块建立了电磁控制阀模型以及三维流场模型，利用UDF编程来实现不同模块间数据的传输，得到了阀芯动态响应特性以及流场特征参数随阀口开度的变化规律。

Abstract

The electromagnetic-machine-liquid three-dimensional simulation method was used to simulate the compression and supply process of unit pump fuel system on the Ansys Workbench platform and the relationship between the electromagnetic system, the mechanical system and the hydraulic system was analyzed. The electromagnetic control valve model and the threedimensional flow field model were established by using Maxwell and Fluent modules. Then the dynamic response characteristics of valve core and the variation rules of flow field characteristic parameters with valve opening were acquired based on the data transmission between different modules realized by UDF programming.

导出引用

赵万林，李国岫，王兰，李治洪，王杰，何双毅. 电控单体泵供油过程联合仿真研究[J]. 车用发动机. 2018, 0(4): 73-78 https://doi.org/10.3969/j.issn.1001-2222.2018.04.014

ZHAO Wanlin，LI Guoxiu，WANG Lan，LI Zhihong，WANG Jie，HE Shuangyi. Co-Simulation for Fuel Supply Process of Unit Pump[J]. Vehicle Engine. 2018, 0(4): 73-78 https://doi.org/10.3969/j.issn.1001-2222.2018.04.014